Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
News
Home > News
Maintaining and Cleaning your Pull Down/Out Stainless Steel Kitchen Faucet
2023 / 04 / 08
A pull-down or pull-out stainless steel kitchen faucet is not only functional but also adds a modern, sleek look to your kitchen. However, to keep it looking brand new, proper cleaning and maintenance are necessary. In this article, we will discuss how to clean water spots and give tips on how to maintain your pull-down or pull-out stainless steel kitchen faucet. Cleaning Water Spots Stainless steel kitchen faucets are prone to water spots, which can be stubborn to remove. Here are some tips to help remove water spots: 1. Use a mild cleaning solution: Mix a few drops of dishwashing soap with warm water and apply the solution to the water spots using a soft cloth or sponge. Rinse off with clean water and dry with a soft towel. 2. Use vinegar and baking soda: Combine equal parts of white vinegar and baking soda to form a paste. Apply the paste to the water spots and let it sit for a few minutes. Scrub the faucet with a soft cloth, rinse with water, and dry with a clean towel. 3. Use commercial stainless steel cleaner: You can also use a commercial stainless steel cleaner, which can be found in most hardware stores. Follow the instructions on the label carefully and use a soft cloth to avoid damaging the faucet.
The Benefits of a Toilet Bidet Sprayer Set Kit
2023 / 04 / 06
A toilet bidet sprayer set kit is a popular alternative to traditional toilet paper used for personal hygiene after using the toilet. It is a device that attaches to your existing toilet water supply and allows you to wash instead of wiping. In this article, we will explore the benefits of a toilet bidet sprayer set kit. 1. Improved Personal Hygiene Using toilet paper alone can leave behind germs and bacteria, leading to an unpleasant odor and increased risk of infection. A toilet bidet sprayer set kit allows for a more thorough clean and offers a more hygienic alternative to toilet paper. It can also be particularly helpful for people who suffer from conditions that make using toilet paper uncomfortable or painful. 2. Reduced Environmental Impact Using a toilet bidet sprayer set kit can also reduce your environmental impact. Toilet paper production requires vast amounts of water and resources, which leads to deforestation, pollution, and greenhouse gas emissions. By reducing the amount of toilet paper used, a toilet bidet sprayer set kit can help reduce deforestation and minimize environmental impact. 3. Cost-Effective Over time, a toilet bidet sprayer set kit can also be cost-effective. While the initial cost of the system may seem high, the ongoing cost of toilet paper can add up quickly. By red
Advantages of Wall Mounted Concealed Grey Waterfall Basin Faucet
2023 / 04 / 04
A wall-mounted concealed grey waterfall basin faucet is an elegant and modernistic addition to any bathroom. It boasts several advantages that make it a popular choice for homeowners and interior decorators. In this article, we will explore the advantages of this type of faucet. 1. Space Saving A wall-mounted concealed grey waterfall basin faucet saves valuable space that a traditional, deck-mounted faucet would occupy. Since this faucet is mounted on the wall, it eliminates extra hardware that would otherwise have taken up counter space. This creates an open and clean bathroom environment with a minimalist aesthetic for those who prefer simplicity. 2. Aesthetic Appeal The sleek and modern design of the wall-mounted concealed grey waterfall basin faucet adds an elegant touch to any bathroom. The grey color and waterfall spout create a luxurious and stylish look that enhances the overall ambiance of the bathroom. This type of faucet is ideal for modern or contemporary bathroom designs, as it stands out as a focal point. 3. Easy to Clean A wall-mounted concealed grey waterfall basin faucet is easy to clean due to its streamlined design. It does not have any complex parts, making it simple to wipe down and keep clean. The faucet's concealed nature also makes cleaning ea
Pros and Cons of Stainless Steel Drinking Water Faucet
2023 / 04 / 02
Stainless steel drinking water faucets have become significantly popular for their durability, hygiene, and aesthetics. However, they also have certain drawbacks that must be considered before making a purchase decision. In this article, we will discuss the pros and cons of stainless steel drinking water faucets. Pros Durability: Stainless steel is known for its durability and resistance to corrosion and rust. Therefore, stainless steel drinking water faucets are durable and long-lasting. Hygiene: Stainless steel is nonporous and easy to clean, making it hygienic and safe for drinking water dispensing. It also does not leach chemicals like lead, making it safe for human consumption. Aesthetics: Stainless steel has a contemporary, sleek, and elegant appearance that adds to the kitchen's overall aesthetics. Stainless steel drinking water faucets come in a variety of styles and finishes, making it easy to match the kitchen's design. Cons Cost: Stainless steel faucets are generally more expensive than other materials like brass or chrome. However, considering their durability and longevity, they tend to be cost-effective in the long run.
How to distinguish the quality of bathroom faucets
2023 / 03 / 21
Bathroom faucets are mainly divided into basin faucets, shower and bathtub faucets according to their functions. The factors that determine the quality of a faucet are generally distinguished from the following three aspects. 1. Electroplating treatment on the surface of the faucet The electroplating treatment on the surface of the faucet plays a great role in the appearance and anti-corrosion performance of the faucet. The national standard is that the salt spray test reaches level 8 within 24 hours, the nickel layer is ≥5um, and the chromium layer is ≥0.1um. There is a simple way to see whether the electroplating is good or bad: see if there are pores or rough places on the surface, and whether the feel is thick and smooth. Take a breath, whether it can dissipate quickly. 2. The valve core and water outlet of the faucet The ceramic valve core is already a faucet at present, which is mainly divided into split type, integrated type and energy-saving type. There is no rubber sealing ring inside the one-piece, so there will be no water leakage due to rubber aging, and the force is consistent and the operation is smooth. The energy-saving type is divided into two levels, and the water output of the first level is 50%. When purchasing a faucet, lift it up and turn the handle left and right several times to see if it is smooth or not is a criterion for judging.
How to maintain the basin faucet
2023 / 03 / 20
Basin faucets are mostly used in the bathroom, and we use it every day when we wash our faces. After the faucet is installed, it is recommended to clean the smudges and fingerprints on the surface every other month. Rinse the surface with clean water and dry it with a soft cloth. The brightness of the appearance can be maintained with car wax for one month. Surface cleaning is for aesthetics, and internal cleaning is an important factor affecting service life. In addition, if the water volume of the faucet is reduced or the water is forked, it means that the bubbler of the faucet is blocked. At this time, the bubbler should be removed, soaked in vinegar, and cleaned with a small brush or other tools. Then reinstall it again. Most people are used to getting up in the morning and turning on the faucet to use it directly, but generally speaking, before using the faucet the next day, the water that has accumulated in the faucet overnight should be drained first, and then used. For faucets, people are "discolored by the smell of lead". In fact, no matter how good the faucet is, it is difficult to avoid more or less lead element precipitation pollution. However, under normal circumstances, due to the role of the lead protective film inside the faucet, its content is greatly reduced. Reduced to standard level. However, long-term retention of water in the faucet will cause the lead protective film to fall off, and the lead element will precip
Heshan Dingquan Sanitary Ware Co., Ltd. Participates in an Exhibition in Vietnam
2023 / 03 / 18
The faucet is an important fixture in every home. Recently Heshan Dingquan Sanitary Ware Co., Ltd. participated in an exhibition in Vietnam to showcase their products and promote their brand. Our company offers a wide range of products, including faucet faucets, kitchen faucets, shower heads and more. We pride ourselves on using high-quality materials and designing products that are as functional as they are beautiful. The exhibition was held in Hanoi, the capital of Vietnam, from March 15th to 19th. It is organized by local trade associations and serves as a platform for companies to showcase their products and services to a wider audience. During the event, the faucet company set up an interactive booth where visitors could test their products and chat with their representatives. They showcased some of their latest products and key styles, including thermostatic faucets and faucets with adjustable flow. The response of the company's participation in the exhibition was good, and many visitors expressed interest in its products. In fact, they received orders from several interested buyers and established valuable contacts with potential business partners. The exhibition provides an opportunity for the faucet company to expand its brand presence in Vietnam and build its reputation in the market. Their participation underscores their commitment to providing high-quality products and exceptional customer service. As the global demand for faucets continues to grow, our company hopes to expand our reach and participate in more exhibitions in the future.
How to Repair the Shower Faucet
2023 / 03 / 13
The shower faucet is an important piece of equipment in the bathroom. Its quality is related to the output of hot and cold water in the entire shower, which affects our daily use. However, in the process of use, the water leakage of the shower faucet usually occurs. Then, the shower How to repair the leaking faucet? Next, let's learn about it with Hammark Sanitary Ware. 1. Close the water inlet valve. The small screw on or behind the faucet removes the handle and secures the handle under the body of the faucet. Some screws are hidden at the bottom of metal buttons, or plastic film plastic buttons, and these buttons or plastic clips go or screw into the handle. Just turn on the button and you'll see the handle screw at the top of the mount. If necessary, use some penetrating oil to loosen the WD-40-spec screws. 2. Remove the handle and check the faucet assembly. Use large carp pliers or a wrench to remove the packing nut, being careful not to scratch the metal, turn on the faucet's rotating spool or shaft and put it down in the same direction. 3. Remove the fixing washer screw. If necessary, use oil seepage to loosen the screws. Check the screw and spool, if there is a new replacement damage. Founded in 2015, Heshan Dingquan Sanitary Ware Industry Co., Ltd. is located in Guangming Road, Airport Development
When installing a shower in the bathroom, pay attention to these points during construction
2023 / 03 / 09
In our daily life, the shower facilities in the bathroom are still used frequently, especially in summer almost every day, so the shower position must be done during the decoration process. First of all, the water pressure of the shower head is related to the problem of water pressure. In some communities, the water pressure is a bit low, and the water flow is easy to become smaller when taking a bath. What should we do at this time? If the water pressure is not enough, you can consider adding a booster pump. After adding the booster pump, you can grab some water from other places, but it is not good for the overall pressure. If the water pressure is particularly low, you can try Try it, if it is basically enough, there is no need to do it. However, situations like insufficient water pressure generally occur in old houses, and these new houses rarely have insufficient water pressure. If you feel that the water pressure in your home is really insufficient, and you don`t want to use a booster pump If so, you can consider buying a supercharged nozzle. Now there is a supercharged nozzle with a very fine water volume, which can increase the water pressure appropriately. There are various types of shower heads on the market. It is recommended not to choose a shower head that is too cheap. After all, this kind
Do you understand these things about thermostatic faucets?
2023 / 02 / 17
Winter has come. Taking a bath in the cold winter is afraid of the water temperature fluctuating hot and cold. It is a very enjoyable thing to take a comfortable hot bath, so if you want to have a constant temperature when taking a bath in the cold winter, you must Install a thermostatic shower head. What is a thermostatic shower head? What are its characteristics? What is the principle of constant temperature? First of all, we know that the shower head adjusts the hot and cold water through a hot and cold mixing valve. We usually call this mixing valve a shower faucet. The old-fashioned shower faucet has two handles to control the size of cold water and hot water respectively. To adjust the water temperature, now the shower faucet only needs one handle to adjust the water temperature, because now only one spool is needed to adjust the mixing ratio of cold water and hot water. The principle of the thermostatic faucet is on the spool. The spool of the thermostatic faucet has a temperature sensing element, which is generally made of paraffin or nickel-titanium alloy. The temperature sensing element will change its shape according to the change of temperature. For example, the temperature sensing element made of paraffin will expand or shrink with the temperature. When the water temperature changes, the volume of paraffin will change, and then through a certain Some control shafts are used to adjust the spool, and the spool adjusts the mixing ratio of cold water and hot water, so that the water temperature ca
How to prevent the faucet from freezing?
2023 / 02 / 13
In order to prevent the faucet from freezing and cracking at low temperature, there are the following preventive measures: 1. At night, the windows of the kitchen, toilet, and all shady rooms should be closed to ensure that the indoor temperature is above 4°C; 2. For rooms where the indoor temperature is lower than 4°C, close the valve of the indoor water meter and drain the remaining water in the water pipe; 3. For rooms where the indoor temperature is lower than 4°C, please ensure that the room temperature is above 4°C. If it cannot be reached, you can use cotton and linen fabrics, old cotton clothes, cotton wool and other insulating materials to thicken and wrap the faucet. 4. Since the thermostatic faucet is equipped with a one-way valve, after the water in the tap water pipe is drained, the faucet needs to be kept warm. Note: If the ambient temperature of faucet installation on the project site is lower than 4°C, it is recommended not to install the faucet temporarily or to completely drain the accumulated water in the pipeline after installing it temporarily without water or passing water to test the water. Founded in 2015, Heshan Dingquan Sanitary Ware Industry Co., Ltd. is located in Guangming Road, Airport Development Zone, Jishan Town, Heshan City. It is a pro
Sanitary ware manufacturers offer you winter faucet maintenance guide
2023 / 02 / 10
The cold winter has come, and the temperature in various places has dropped sharply. Do you know that the faucets in your home also need winter maintenance? Faucet installation environment and temperature requirements: 1. Can only be installed in a frost-free room; 2. The impact of scale, water and alkali caused by extreme environmental impacts (such as the attack of chemical substances or the chemicals contained in cleaning substances), and the damage caused by extreme cold and extreme heat, etc.; 3. The faucet product is suitable for the water pipeline in the building, and the water temperature is not higher than 90°C; it cannot be used in fluids other than water or for other purposes; the product's use environment is too low (less than 4°C) or the use environment is too high (high at 90°C) may be bad. When the temperature is below 4°C, the reasons for the cracking of the faucet include but not limited to the following reasons: The faucet is installed outdoors, the water inlet valve is not closed, and there is no antifreeze protection; The owner is away on vacation or does not live for a long time, the room is not heated, and the water inlet valve is not clos
Four classifications of thermostatic control valves
2023 / 02 / 07
Thermostatic control valves can be classified according to the different temperature-sensing media filled by their temperature bulbs, which can be roughly divided into the following four categories: 1. Steam temperature bulb type The medium filled in the temperature bulb is a low-boiling liquid. When the external temperature rises, part of the liquid vaporizes into gas, and the volume of the temperature bulb increases to push the valve stem, and the opening of the valve is closed to reduce the water flow into the radiator. , when the outside temperature drops, part of the gas liquefies into liquid again, the volume of the temperature bulb decreases, and the opening of the valve increases, thereby increasing the water flow into the radiator. The temperature-sensing medium in this temperature bulb is often in a mixed state of gas and liquid. Its advantage is that the action time is fast, but the requirements for the sealing of the temperature bulb are very strict, and it is rarely used in China at present. 2. Liquid temperature bulb The temperature-sensing medium filled in the temperature bulb is a special liquid, usually methanol or toluene. This kind of temperature bulb has a large volume and short action time, and is currently widely used in China. 3. Solid temperature bulb
Don't you know that the thermostatic faucet has these benefits?
2023 / 01 / 09
Just imagine turning on the faucet in the cold winter, but the water is icy cold. Many friends want to have warm water at home when the weather is cold. Maybe many people`s concept of the faucet is still on the faucet that rotates left and right to adjust the water temperature. , The thermostatic faucet does not require us to repeatedly adjust the water temperature! In fact, the thermostatic faucet is very similar to the common faucet in our home, except that it has its own thermostatic debugging internal valve, which can quickly mix cold and hot water in a short time, and the temperature of its outlet water can be set in advance. Use It is also more convenient to get up. Its internal thermal element can control and debug the internal valve to open the cold water side first to reach a certain amount of internal water, then seal the cold water and start injecting hot water. When the mixed temperature of cold and hot water reaches the previously set temperature, the water will flow out. The more suitable temperature for human surface contact is between 35°C and 40°C. The faucet of the thermostatic shower head has a built-in thermostatic valve. The thermostatic valve automatically adjusts the mixing ratio of cold and hot water through physical principles. It can accurately reach the corresponding water temperature adjusted by the temperature knob without electricity. and hot water inlet water pressure. When ordinary shower heads
Precautions for installation and use of thermostatic faucets
2023 / 01 / 07
The thermostatic faucet can also be called a thermostatic faucet or a thermostatic shower mixing faucet. Its function is to automatically mix cold water and hot water into warm water with a preset temperature. The first generation of cold and hot water mixing faucet is a two-handle mixer (Two Handle Mixer). The water mixing faucet is a single handle faucet (Single lever Mixer). Its core is a ceramic thermostat valve core. The user can adjust the temperature of the mixed water by swinging the handle left and right, and the water output can be adjusted by swinging the handle up and down. But, when the water pressure of hot water or cold water changes suddenly, or when the temperature of hot water changes suddenly, the above two mixing faucets all must go to readjust the water temperature by manual operation. The thermostatic faucet can automatically balance the water pressure of cold water and hot water in a short period of time through the thermostatic adjustment spool that comes with the faucet, so as to maintain the stability of the outlet water temperature, without manual adjustment at all. Precautions for installation and use of thermostatic faucets: 1. Users with small solid lumps in tap water are not suitable for using thermostatic faucets; 2. If the tap water contains powdery sediment or soft foreign matter, it may reduce the sensitivity of the thermostatic valve core, and may also shorten the service life of the thermostatic faucet; 3. Try to shorten the distance between the water heater and the faucet so that the hot water can reach the faucet as soon as possible;
What should I pay attention to when buying a shower head?
2023 / 01 / 06
First of all, showers are divided into three types: hand-held showers, overhead showers, and side showers, and three categories: hand-held, overhead, and side showers. When consumers buy showers, they naturally pay attention to the issue of water saving. The steel ball valve core used in the shower, together with the hot water controller, can adjust the inflow of hot water into the mixing tank, so that the hot water can flow out quickly and accurately. Using new technology, it can not only save water, but also not affect the bathing experience. Comfort, under normal circumstances, a well-designed shower can save 50% of water than ordinary showers. In fact, for the shower, the water outlet method directly affects the feeling of bathing. In the past showers, most of the water outlets were hidden inside, but now most of the showers expose the water outlets outside. According to the characteristics of the water quality in the north, the rubber water outlets are easier to clean, and it is not easy to grow scale. It is more convenient to clean, and can be scrubbed with hands or cloth. In addition, the water holes are highlighted, and the shower water will be more natural. Let's talk about the installation height of the shower. The installation height of the shower can be divided into two types according to the type of shower: According to relevant regulations, the center of the concealed water outlet on the wall of the concealed shower should b
What aspects should we choose when we choose to buy a shower?
2023 / 01 / 04
Taking a bath is a super relaxing time of day for us, and it is really something that we enjoy every day. In winter, you can feel the warmth after taking a shower, and in summer, you can wash away your tiredness and feel cool and comfortable instantly, so today we are going to talk about the C-position of this shower room-the shower head. Taking a bath is a super relaxing time of day for us, and it is really something that we enjoy every day. In winter, you can feel the warmth after taking a shower, and in summer, you can wash away your tiredness and feel cool and comfortable instantly, so today we are going to talk about the C-position of this shower room-the shower head. So what aspects should we choose when we choose to buy a shower? 1. Choose the one with strong supercharging performance Since the communities we live in are quite different, and the floors are also different, the size of the water pressure is actually not easy, and the problem of low water pressure also occurs frequently, so when choosing a shower, you must choose a booster as much as possible. The performance is strong, the difference is really big. The pressurization of the shower is actually understood from a physical point of view as the air compressing the water flow. The internal pressure of the shower increases to form a higher-speed air flow. At the same time, compared with the water output of the conventional shower, the pressurized shower not only produces powerful water The pressure is stronger, the water jetting process is longer, satisfying low-pressure users, and the water spray is thinner and more powerful, which can save water more effectively.
What should I do if the stainless steel shower faucet is blocked?
2022 / 12 / 13
After the faucet has been used for a long time, it is easy to block due to the water quality and quality. Many people don't know what to do. Let me share with you how to deal with the blockage of the stainless steel shower faucet. 1. Use lubricant If the metal of the stainless steel shower faucet is rusted and the blockage is very serious, then use a rust-removing and anti-rust lubricant. This rust removal lubricant can have very good affinity and penetration to metal. The rust layer can be separated from the metal layer. Make the contact surface of the rusty part and the metal, and leave a protective film. Let the shower never rust. If the stainless steel shower faucet in your home is not made of stainless steel, this method may be used. 2. Wipe with a towel If your stainless steel shower faucet has been around for a certain number of years, and its appearance is relatively old. It is better to suggest that you replace a new shower. The continued use of such stainless steel shower faucets is not good for health. Because there may be a lot of harmful bacteria and impurities in it. 3. With acupuncture If some of the small holes of the stainless steel shower faucet in your home are blocked, then turn on the water first to see which holes are
What aspects should we choose when we choose to buy a shower?
2022 / 12 / 07
Taking a bath is a super relaxing time of day for us, and it is really something that we enjoy every day. In winter, you can feel the warmth after taking a shower, and in summer, you can wash away your tiredness and feel cool and comfortable instantly, so today we are going to talk about the C-position of this shower room-the shower head. Taking a bath is a super relaxing time of day for us, and it is really something that we enjoy every day. In winter, you can feel the warmth after taking a shower, and in summer, you can wash away your tiredness and feel cool and comfortable instantly, so today we are going to talk about the C-position of this shower room-the shower head. So what aspects should we choose when we choose to buy a shower? 1. Choose the one with strong supercharging performance Since the communities we live in are quite different, and the floors are also different, the size of the water pressure is actually not easy, and the problem of low water pressure also occurs frequently, so when choosing a shower, you must choose a booster as much as possible. The performance is strong, the difference is really big. The pressurization of the shower is actually understood from a physical point of view as the air compressing the water flow. The internal pressure of the shower increases to form a higher-speed air flow. At the same time, compared with the water output of the conventional shower, the pressurized shower not only produces powerful water The pressure is stronger, the water jetting process is longer, satisfying low-pressure users, and the water spray is thinner and more powerful, which can save water more effectively. 2. The outlet hole is good and there are many bathing modes
2022 / 08 / 22
Thermostatic shower is another name for thermostatic faucet for shower, also known as thermostatic shower faucet or thermostatic shower faucet. In the family, there are generally four places to use the hot and cold water mixing faucet: kitchen, wash basin, bathtub, shower room. Among them, because the mixed warm water used in the shower is directly sprayed on the body of the person through the shower, maintaining a constant temperature can greatly improve the safety and comfort of the shower. The use of a thermostatic mixing faucet with a shower head can achieve this purpose. The thermostatic faucet can automatically balance the water pressure of cold water and hot water in a very short period of time through the thermostatic adjustment valve core of the faucet, so as to keep the water temperature stable, and no manual adjustment is required at all. Thermostatic faucets first appeared in Europe. In 2014, there were mainly two automatic temperature adjustment methods, which used different thermostatic valve cores: one was a paraffin thermostatic element (Wax Element) valve core; the other thermostatic valve core was made of shape memory alloy ( Shape Memory Alloys referred to as SMA) spring.
DQOK Suppliers specializing in the production of sanitary products
2022 / 08 / 22
Several of our advantageous categories 1. Triple Bathtub Faucet. There are two water outlets, one for the bathtub shower and one for the faucet under the shower for the shower. 2. Basin Faucet. Above all kinds of basins in the bathroom, the water outlet is shorter and lower, and it is mainly used for washing and cleaning. 3. Multifunctional Kitchen Faucet. Generally, it is double, which can pass hot and cold water. The water outlet is higher, the front end of the faucet is longer, and some even have a hose, which can be rotated at multiple angles for washing.
DQOK Teach you how to choose a faucet
2022 / 08 / 22
Look at the surface first. The main body of the Basin Faucet is cast from brass, after grinding and polishing, and then chrome-plated and other surface treatments. Regular product body casting and surface treatment have strict process requirements, and after neutral salt spray test, there should be no rust within the corresponding period. Therefore, when choosing a faucet, you should pay close attention to its surface, touch it without burrs, observe no pores, corrosion marks, no oxidation spots, crystal clear and shiny, and feel the thickness of the coating. The surface coating of the faucet is galvanized, titanium-plated, spray-painted, etc. The thickness of the coating is better, and the surface of the coating can be observed with eyes to see if it is bright. The coating of imported faucets is thicker and is not easy to fall off and oxidize. The electroplating layer should have a protective film, and the electroplating layer without a protective film is easy to fade. Gently turn the handle, whether it is light and flexible, and whether there is a sense of blocking and stagnation. A faucet that switches seamlessly, effortlessly, and doesn't slip is better. Inferior gaps are large, and the sense of obstruction is large. Knocking on the main body of the faucet, whether the sound is dull, and carefully observe the faucet interface, whether it is a copper body, if the sound is crisp when tapping, it may be made of stainless steel and other materials, of course, it is worse. Look at the various parts of the faucet, especially whether the main parts are tightly assembled. The valve body and handle of a good faucet are all made of brass, which is heavy and has a dignified feeling. Check the various parts of the faucet and observe whether the assembly is tight and loose. Generall
Send Inquiry
Mr. Steven Huang
Tel:86-0750-18026755393
Fax:86-0750-8659928
Mobile Phone:+8618026755393
Email:steven@dqoksanitary.com
Address:Dingquan sanitary ware, aircraft factory industrial zone, Jishan Town, Heshan City, Jiangmen, Guangdong
Related Products List
Mobile Site
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.